Table of Contents
Advertisement
USER'S GUIDE
CHCALL
is OFF – the monitored activity looks like this:
:0hi howie
hello ted how goes it?
:1*** CONNECTED to WA7GXD
:1must be a dx record. ge lyle
:01UNreal ted! fl-az no digis!
:1big band opening...ge
CHCALL
ON, the same activity looks like the following example. The additional information
shown as a result of setting
:0:K4NTA:hi howie
hello ted how goes it?
:1:WA7GXD:*** CONNECTED to WA7GXD
:1must be a dx record. ge lyle
:01UNreal ted! fl-az no digis!
:1:WA7GDX:big band opening...ge
CHCALL
With
ON, ":1" becomes ":1:<call sign>:"
NOTE:
To switch channels during your multi-connect conversations, type
acters ":0" and ":1" without a ":" after them.
CHDOUBLE ON|OFF
Mode: Packet
Parameters:
ON -
OFF - Received CHSWITCH characters appear once (not doubled).
CHDOUBLE
ON displays received CHSWITCH characters as doubled characters.
In the following example
|| this is a test.
The sending station actually transmitted:
| this is a test.
The same frame received with
| this is a test.
CHDOUBLE
Set
ON when operating with multiple connections to tell the difference between
CHSWITCH characters received from other stations and CHSWITCH characters generated by
your PK-232.
NOTE:
CHSWITCH characters must not be one of the channel numbers (0 to 9).
PK232UG Rev. B 9/86
CHCALL
ON is underlined
Mnemonic: CHD
Received CHSWITCH characters appear twice (doubled).
CHDOUBLE
is ON and
CHDOUBLE
Default: OFF
CHSWITCH
is set to "|" ($7C):
OFF would be displayed as:
6-26
COMMAND SUMMARY
CHSWITCH
char-
128
Advertisement
Table of Contents
