Mto - AEA PAKRATT PK-232 Operating Manual

USER'S GUIDE
MSTAMP
The command activates or disables time stamping of monitored packets. When your PK-
232's internal software clock is set, date and time information is available for automatic logging of
packet activity and other applications.
MSTAMP
When is OFF, the packet header display looks like this:
W2JUP-4*>KA2EYW-1>AI2Q <I;2,2>:
MSTAMP
When is ON and
22:51:33 W2JUP-4*>KA2EYW-1>AI2Q <I;2,2>:
When both MSTAMP
10-Jul-86 22:54:25 W2JUP-4*>KA2EYW-1>AI2Q <I;2,2>:
Set the date and time with the
MSTAMP
Set ON increase the length of the address display.
HEADERLN
Set ON to display this information on a separate line.
MTO ALL/NONE,YES/NO call1[,call2..]
Mode: Packet
Parameters: call -

MTO

uses arguments to determine how your PK-232 monitors the Packet channels and displays in-
formation – which stations' packets will be displayed and which stations' packets will be masked or
MTO
hidden. is set to NONE when you start your PK-232 for the first time.
Type MTO to display the ALL/NONE, YES list/NO list status of call signs of the stations to which ad-
dressed packets will or will not be displayed. You can use the abbreviated command form or mne-
monic.
mto
cmd:
MTO
or
mt
cmd:
MTO
To stop packets addressed to all stations from being displayed, type
To display only packets addressed to one or more specific stations, type
of call signs. Packets will be displayed only if addressed to stations whose call signs are listed after
YES.
To hide or mask packets addressed to one or more specific stations, type
list of call signs. Packets addressed to stations whose call signs are listed after NO will not be dis-
played.
PK232UG Rev. B 9/86
DAYSTAMP
is OFF, the display looks like this:
and DAYSTAMP are ON, the display looks like this:
DAYTIME
ALL/NONE, YES list/NO list
(list of up to eight call signs, separated by commas).
all
yes WX1AAA,WX2BBB,WX3CCC,WX4DDD
command.
Mnemonic: MT
6-51
COMMAND SUMMARY
Default: none
MTO ALL.
MTO YES followed by a list
MTO NO followed by a
153