Table of Contents
Advertisement
USER'S GUIDE
n
HBAUD
Mode: Packet
n
Parameters:
-
Available HDLC packet data rates
2400, 4800 and 9600 bits per second.
Example:
HBAUD 300
HBAUD
sets the radio ("on-air") baud rate only in the Packet operating mode.
tionship to your computer terminal program's baud rate.
You must use the same radio data rate as the distant station.
NOTE:
Modern commercial and amateur terminology no longer refers to the speeds or data
rates in "WPM". The term "bauds" is now universally accepted for FSK and AFSK
operating using monobit data. In these cases, the terms bauds" and "bits per
second" mean the same thing. Either term may be used.
HEADERLN ON|OFF
Mode: Packet
Parameters:
ON -
OFF - The header and text of monitored packets are printed on the same line.
HEADERLN
affects the display of monitored packets. When
tion is shown on the same line as the packet text as shown below:
WX1AAA>WX2BBB: Go ahead and transfer the file.
HEADERLN
When
is ON (default), the address is shown, followed by a <CR><LF> that puts the
packet text on a separate line as shown below:
WX1AAA>WX2BBB:
Go ahead and transfer the file.
MRPT
MSTAMP
If
or
page when these functions are active.
PK232UG Rev. B 9/86
Mnemonic: HB
values specifying the rate or signaling speed in bauds from the PK-232 to
the radio.
n
include 45, 50, 57, 75, 100, 110, 150, 200, 300, 600, 1200,
Mnemonic: HE
The header in a monitored packet is printed on a separate line from the text.
HEADERLN
are ON, set
Default: 1200 bauds
Default: ON
HEADERLN
ON; long headers may extend across your screen or
6-42
COMMAND SUMMARY
HBAUD
has no rela-
is OFF, the address informa-
144
Advertisement
Table of Contents
