Myalias; Myaltcal - AEA PAKRATT PK-232 Operating Manual

USER'S GUIDE
You can include optional SSIDs specified as "-
"YES N6IA" any combination N6IA, N6IA-1,...N6IA-15 will be matched and processed. If
to "YE N6IA-1" or "NO N6IA-1", then only N6IA-1 will match and be processed.
MFROM MTO
When and
arguments take the following priority:
1. ALL,
MTO
Clear with %, &, or
n
MYALIAS call[- ]
Mode: Packet
Parameters: call -
n
-

MYALIAS

specifies an alternate call sign (in addition to the call sign specified in
a digipeater only.
MYALIAS
permits both normal HID identification and an alias alternate, repeater-only "call-sign".
Wide-coverage digipeater operators in some areas change their call sign to a shorter and (usually)
easier to remember identifier.
Identifiers used include International Civil Aviation Organization (ICAO) airport IDs, sometimes
combined with telephone area codes.
aaaa

MYALTCAL

Mode: AMTOR
aaaa
Parameters: - Your alternate SELective CALling code (SELCALL)
MYALTCAL
Use the command to specify an your alternate SELCALL which, under certain condi-
tions, may be convenient or necessary.
You can enter an additional SELCALL code not related to your call sign. The alternate SELCALL can
be any four alphabetical characters, or can be numeric strings of either four or five characters.
Your PK-232 automatically translates your numeric MYALTCAL input according to CCIR Recommen-
dation 491, Direct-Printing Telegraph in the Maritime Mobile Service.
MYALTCAL
is generally used for special applications such as receiving network or group broadcasts
in AMTOR Mode B Selective (Bs or SELFEC). The sending station must address all stations by one
common SELCAL. Any other type of all "ships and stations" operation using special or group SEL-
CALs can be handled with
PK232UG Rev. B 9/86
contain different types of arguments, to avoid any possible conflict, the
2. NO list, 3. YES list,
OFF as arguments.
Mnemonic: MYA
Alternate identity of your PK-232
0 to 15, an optional substation ID (SSID)
Mnemonic: MYALT
MYALTCAL
.
n
" after the call sign. If
4. NONE
Default: empty
Default: empty
6-52
COMMAND SUMMARY
MTO
is set to "NO N6IA," or
MTO
MYCALL
) for use as
is set
154