Table of Contents
Advertisement
USER'S GUIDE
MCON
4.6.12.3
The
MCON
Use the
connected to a distant station. Use this feature to have your PK-232 "listen" for a specif-
ic station while you are connected to and conversing with someone else.
MCON
Set
nected, but have all monitoring automatically cease when you are connected to some-
one.
MCON
works like
are increased, more functions are added in monitoring sequences. The meaning of the
parameters values are identical to those shown under the
MFILTER
4.6.12.4
The
MFILTER
Use the
ample, you can command your PK-232 system to filter out form feeds, bell characters
or extra <LF> that may be sent by the station with which you're connected, but which
may interfere with your display or otherwise disturb your operations. You can specify up
to four characters by giving the ASCII character code in hex or decimal. Some examples
follow:
o To prevent a <CTRL-L> character from clearing your screen, set
o To eliminate <CTRL-Z> characters, which some computer interpret as end-of-file
markers, set
o To prevent <CTRL-G> characters from "beeping" your computer or terminal, set
MFILTER
Enter the ASCII or hexadecimal values of the selected characters separating each value
with a comma:
MFILTER $07,$13
cmd:
MHEARD
4.6.12.5
The
MHEARD
Use the
PK-232 was powered up, or since the last time the
Clear the MHEARD buffer by typing either a "percent sign" (%), an ampersand (&), N,
NO,
NONE
o Stations that are heard directly are marked with a *.
o Stations heard through a digipeater are not marked.
Entries in the "heard" report are also time stamped if the date and time has been set.
The PK-232's time is updated continuously as long as it is powered.
MSTAMP
4.6.12.6
Monitored packets can be time-stamped if
MSTAMP ON
tion, set
to command
PK232UG Rev. B 9/86
Command
command for selective monitoring of other traffic on the channel while
0
OFF
to
(zero) or
to monitor packet activity when your station is not con-
MONITOR
but affects your display while connected. As
Command
command to "filter" selected characters from packets received. For ex-
MFILTER
26
to
.
7
to
.
Monitor Buffer
command to display a list of stations heard since the last time your
or
OFF
after the command word.
– The Monitor Time-Stamp Command
. You can also time-stamp connect and disconnect messages with
CONSTAMP ON
.
MHEARD
DAYTIME
has been set. to enable this func-
4-33
OPERATING MODES
MCON
MONITOR
command.
MFILTER
to
buffer was cleared.
settings
12
.
86
Advertisement
Table of Contents
