Are You Available To Chat; Do You Want To Transmit - AEA PAKRATT PK-232 Operating Manual

USER'S GUIDE
You can can send your own connect command if you wish to chat with the calling sta-
tion even though his/her call request has been rejected.
CFROM
Clear
Error messages will result from invalid commands. Here are some examples:
cfrom all w2jup
cmd:
?too many
cfrom no
cmd:
?not enough
cfrom w2jup
cmd:
?need ALL/NONE YES/NO
4.6.8.3

Are You Available to Chat?

CMSG ON
Set
sage you might put in a telephone answering-machine. If you're not available to answer
connect requests, your PK-232 automatically sends the
that connects to your system.
The CTEXT
<CR>s by prefixing them with the pass character (<CTRL-V> is the default):
CTEXT Sorry, I can't talk right now.<CTRL-V><CR>
cmd:
I'll be on air again after 8 PM.<CTRL-V><CR>
Joe
CFROM must be set to
this message be sent to stations connecting to you.
4.6.8.4

Do You Want to Transmit?

If you want to leave your station on to monitor and perhaps record the activity on the
channel, but prevent your station from transmitting, set
would probably want to set
Type XMITOK OFF
Type CFROM NONE
PK232UG Rev. B 9/86
with %, & or OFF as arguments.
(default is OFF) and use the
message can be any text string up to 120 characters. You can include
ALL (default) so that the connection takes place in order that
CFROM
(calls not allowed with ALL or NONE)
(NO and YES require call sign list)
(Calls must follow YES or NO)
CTEXT
command to enter the sort of mes-
CTEXT
NONE
to as well.
4-25
OPERATING MODES
message to each station
XMITOK OFF.
In this case, you
78