Table of Contents
Advertisement
USER'S GUIDE
You can include optional SSIDs specified as
"yes NK6K", any combination NK6K, NK6K-1,...NK6K-15 will be matched and processed. If
is set to "yes NK6K-1" or "no NK6-1", then only NK6K-1 will match and processed.
Clear DFROM with %,
DISCONNE
Mode: Packet
DISCONNE
is an immediate command that initiates a disconnect request to the distant station to
which you are connected.
If your disconnect command is successful, your monitor will display:
*** DISCONNECTED: {call sign}
Other commands can be entered while a disconnect is in progress. New connections are not al-
lowed until the disconnect is completed.
If the retry count is exceeded while waiting for the distant station to acknowledge your discon-
nect command, your PK-232 switches to the disconnected state.
If another disconnect command is entered while your PK-232 is trying to disconnect, the retry
count is immediately set to the maximum number. In either case, your monitor displays:
*** Retry count exceeded
*** DISCONNECTED: {call sign}
Disconnect messages are not displayed when your PK-232 is in the Transparent Mode.
DISPLAY [class]
Mode: Command
Parameters:
class - Optional parameter identifier, one of the following:
DISPLAY
is an immediate command. When
sponds with:
DISPLAY A,C,I,L,M,R,T,Z
cmd:
You can display subgroups of related system parameters by specifying the optional class parame-
ter:
PK232UG Rev. B 9/86
&
or
OFF
as arguments.
Mnemonic: D
Mnemonic: DISP
(A)sync
display asynchronous port parameters
(C)haracter
display special characters
(I)d
display ID parameters
(L)ink
display link parameters
(M)onitor
display monitor parameters
(R)TTY
display RTTY parameters
(T)iming
display timing parameters
(Z)
display the entire command/parameter list
-n
after the call sign. If
Immediate Command
Immediate Command
DISPLAY
is typed without a parameter, the PK-232 re-
6-37
COMMAND SUMMARY
DFROM
is set to "no NK6K" or
DFROM
139
Advertisement
Table of Contents
