Table of Contents
Advertisement
USER'S GUIDE
If the PK-232 Start and Stop characters are set to $00, hardware flow control is always selected,
regardless of the setting of
TXREV ON|OFF
Mode Baudot/ASCII/AMTOR
Parameters:
ON -
OFF - Transmit data polarity is normal.
TXREV
Use the
Command to invert the polarity of the data sent to the PK-232's AFSK tone genera-
tor, thus reversing mark and space in the transmitted AFSK and FSK signals.
In some cases, the station you're working may be receiving inverted data although it is transmit-
ting in correct polarity.
TXREV
Set
ON to reverse the sense of your transmitted signals.
UNPROTO call1 [VIA call2[,call3...,call9]] Mnemonic: U Default: CQ
Mode: Packet
Parameters:
call1 -
call2-9 -
UNPROTO
sets the digipeat and destination address fields of packets sent in the unconnected (un-
protocol) mode.
Unconnected packets are sent as unsequenced I-frames with the destination and digipeat fields
taken from 'call1' through 'call9' options. When a destination is not specified, unconnected packets
are sent to 'CQ'.
Unconnected packets sent from other packet stations can be monitored by setting MONITOR to a
value greater than '1' and setting
The digipeater list can also be used for beacon packets.
To send your beacon message through one or more digipeaters, type the following:
UNPROTO BEACON VIA WX1AAA,WX2BBB,WX3CCC
Your beacon is routed to and repeated by each of the digipeaters in the order listed.
Some PBBSs and other types of host computer systems may use this form of UNPROTO address-
ing to disseminate their traffic or mail lists over the channel to a wider audience.
To address a PBBS mail list through one or more digipeaters, type the following:
UNPROTO MAIL VIA WX1AAA,WX2BBB,WX3CCC
The resulting 'unproto' beacon may look like this:
W2JUP-4>MAIL:
QTC {List of callsigns with mail waiting in the PBBS}
PK232UG Rev. B 9/86
TXFLOW
.
Mnemonic: TXR
Transmit data polarity is reversed (mark-space reversal).
Call sign to be placed in the TO address field.
Optional digipeater call list, up to eight calls.
MFROM
to ALL.
Default: OFF
6-68
COMMAND SUMMARY
170
Advertisement
Table of Contents
