Ctext - AEA PAKRATT PK-232 Operating Manual

USER'S GUIDE
NOT CONNECTED TO ANY STATION
cs
cmd:
Ch. 0 - IO DISCONNECTED
Ch. 1 -
Ch. 2 -
Ch. 3 -
Ch. 4 -
Ch. 5 -
Ch. 6 -
Ch. 7 -
Ch. 8 -
Ch. 9 -
If you're connected to several stations, the
lows:
This sample display shows that:
CHANNEL 0 has the input and output channels – you're using it!
CHANNEL 1 is connected to WX2BBB "permanently".
All other channels' states are shown as they might appear with multiple connections.
text

CTEXT

Mode: Packet/AMTOR
text
Parameters: - Any combination of characters up to a maximum of 120 characters.
CTEXT
is the "automatic answer" text you type into a special section of the PK-232's memory.
The default text says "Please leave a message, then disconnect."
CMSG
If is set ON:
In Packet operation, the
station.
In AMTOR, if the distant station send the
CTEXT
with the message unless
PK232UG Rev. B 9/86
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
CONNECTED TO SEVERAL STATIONS
cs
cmd:
Ch. 0 - IO CONNECTED to WX1AAA
Ch. 1 - CONNECTED to WX2BBB P
Ch. 2 - CONNECTED to WX3CCC
Ch. 3 - CONNECTED to WX4DDD
Ch. 4 - CONNECT in progress
Ch. 5 - DISCONNECTED
Ch. 6 - DISCONNECTED
Ch. 7 - CONNECTED to WX5EEE via WX6FFF
Ch. 8 - DISCONNECTED
Ch. 9 - DISCONNECTED
Mnemonic: CT
CTEXT
message is sent as soon as another station connects to your
CTEXT
CONNECTED TO ONLY 1 STATIONS
cs
cmd:
Ch. 0 - IO CONNECTED to WX1AAA
Ch. 1 -
Ch. 2 -
Ch. 3 -
Ch. 4 -
Ch. 5 -
Ch. 6 -
Ch. 7 -
Ch. 8 -
Ch. 9 -
CSTATUS
command shows your connect status as fol-
Default: See sample
WRU?
command (FIGS D), the PK-232 will respond
is empty.
6-33
COMMAND SUMMARY
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
DISCONNECTED
135