Network; Figure 37: Network > Basic Screen - FLIR CF-5212 User And Installation Manual

Network

From the System screen, click the Network tab.
The following screens are available from the Network tab:
 
Basic QoS
Basic
The Basic screen is used to configure the camera's basic network settings.
It is possible to connect to the camera with either fixed or dynamic (DHCP) IP address. The camera
also provides PPPoE (Point-to-Point Protocol over Ethernet) support for users who connect to the
network via PPPoE.
The Basic screen is divided into three sections: General, Advanced and IPv6 Configuration.
General
Select one of the following options in the General area for configuring network settings:
Get IP address automatically
Use fixed IP address
User PPPoE
April 25, 2017
 
SNMP UPnP
Figure 37: Network > Basic Screen
CF-5212/CF-5222 User and Installation Guide
 
DDNS Mail
Configuration and Operation

FTP
49