Internet Security Settings - FLIR CF-5212 User And Installation Manual

Appendices
A.2. Internet Security Settings
If ActiveX control installation is blocked, either set Internet security level to default or change ActiveX
controls and plug-in settings.
To set the default Internet security level
1. Start Internet Explorer (IE).
2. From the Command Bar toolbar, select Tools and select Internet Options from the menu that
appears.
3. In the Internet Options window that appears, select the Security tab.
4. Select
5. If the settings are not defined as default, select Default Level and move the Allowed levels for
this zone slider to Medium-high and select OK.
6. Close all browsers and reopen so that the settings take effect.
112
Figure 106: Command Bar Toolbar – Select Internet Options
in Select a zone to view or change security settings.
Figure 107: Internet Options Screen
CF-5212/CF-5222 User and Installation Guide April 25, 2017