Connecting Power To The Camera - FLIR CF-5212 User And Installation Manual

Note:
An Ethernet crossover cable can be used when connecting the CF-5212/CF-5222 camera directly to
the PC.

Connecting Power to the Camera

The camera can be powered by Power over Ethernet (PoE) or by an external 12VDC or 24VAC adaptor
(not included in the package).
If using an external power supply, connect the power leads or three-pin power terminal block to
the power supply.
If using PoE, make sure that a Power Sourcing Equipment (PSE) device is used in the network.
Make sure the camera's power cable is properly connected. All electrical work must be performed in
accordance with local regulatory requirements.
April 25, 2017 CF-5212/CF-5222 User and Installation Guide
Introduction to the CF-5212/CF-5222 IP Fixed Camera
13