Samsung IAB Series Install Manual page 83

Dehumidification mode guide –
In-device short circuits due to moisture can also occur during product use.

During use, please note below to maintain product quality.

− If any of the following conditions are met during the operation of the product, please dehumidify it.
 If the usage environment exceeds our product operation specifications (indoor temperature
40 degrees, humidity 80%)
 Screen has not been used for more than 10 days in an environment that exceeds product
operation specifications
− If the surrounding environment exceeds our product operating specifications, we do not provide product
warranty services.
− If you are using the product, or if there is interior design or other construction at the place, dehumidify it
according to the installation standards.
− Even in the environment within our operating specifications, rapid inflow of hot and humid air from the outside
may cause condensation on the surface of the product. If condensation occurs on the surface of the product, dry
the moisture completely and dehumidify it.
In use
This content should be recognized by the customer who runs the screen
Please print it out by the installer and deliver it to the customer (user)
82
LED R&D Lab(VD)