Dehumidification Mode Guide - Samsung IAB Series Install Manual

Dehumidification mode guide

 If moisture penetrates the LED device, a short circuit in the device may occur in the
long term, resulting in a line-type error.
 In the case of LED products, it is advantageous to prevent moisture penetration due to
the characteristics of LED modules and internal device structures. Dehumidification
mode is required only when the following conditions are met (optional progress)
∙ Where the vacuum packaging is damaged and air is introduced and stored for a long time
∙ Installation environment is out of room temperature 0~40 degrees and humidity 10~80%
∙ Volatile products such as oil paint and thinner are used around the installation site
(Details can be found in 'Product Information and Installation Notes')
- When installing a screen that requires dehumidification, you must follow the method on the next
page.
This content should be recognized by the customer who runs the screen
Please print it out by the installer and deliver it to the customer (user)