Gradation Calibration - SMC
Preparation
work
-. IP setting of WIFI router and IAB
-. Check if the layout of all cabinets is normal in LSM.
-. SMC (Sub Module Calibration) app install
LSM
Setting
Caution
- IWJ, IWR model
→ SMC should be proceeded separately in Dynamic
Peaking ON / OFF
When operating remote control
.MENU → Picture → LED HDR
→
Turn on Dynamic Contrast Optimization
→ SMC Calibration
.MENU → Picture → LED HDR
→
Turn off Dynamic Contrast Optimization
→ SMC Calibration
When operating LSM
. Dynamic Peaking ON/OFF at the bottom of S-BOX
setting menu
- After replacing the cabinet, make sure to specify Ref and
calibrate it.
Download
If you need SMC, contact the person in charge of B2B
Default
ON
156
at the head office
LED R&D Lab(VD)