Samsung IAB Series Install Manual page 10

1. Product and installation information
◆ Heat dissipation guide
 Installation condition
- Conditions for using SAMSUNG WALL MOUNT
- Solar direct sunlight conditions cannot be installed (including glass window passage conditions)
- It is recommended to use room temperature below 25°C
- Effect of Cold/Hot Air Conditioning System
- When cold / hot air is the same air conditioning system,
∙ Be careful not to let the warm air touch the product.
- Outside temperature measurement position
Measured at a distance of 300mm from the center of the product
 Air vent aperture ratio
-
use mesh type air vent
-
If the aperture ratio is not 100%, the separation distance =
���� ���� ���� ���� ��������. �������� ���������������� ℎ�������� ����
-
aperture ratio (%) =
���� ���� ����
※ It is written based on Full white, back light 7
Video, created based on back light 10
Outside
temperature
measurement
position
Minimum distance
aperture ratio(%) / 100
9
300mm
c
A
LED R&D Lab(VD)