Gradation Calibration - SMC
Comparison of Target and Reference Selection Adjustments
Cabinet
replacement
Replaced cabinet
Replace two cabinets
Specifies only the reference.
→ All other cabinets are processed as targets
Replaced cabinet
Replaced cabinet
Real process
– All cabinets except Reference are designated
as targets and cal is proceeded.
Target
Target
Set Ref only
reference
Replaced cabinet
reference
Target
Target
Target
163
Set Target only
Specifies only the target
→ Proceed with specified cabinet (or module only) cal
Target
Replaced cabinet
Target
Replaced cabinet
Real process
– Target only proceed with cal
Target
Target
LED R&D Lab(VD)