Samsung IAB Series Install Manual page 58

4. FRAME installation and cable connection
⑩ Connect the cable below whenever you hang one ASSY BRACKET P-FRONT to the P-FRAME.
- After creating a space by pulling the bottom of the P-FRONT, connect the OCM cable to the CN701 of the BN41-03045A board
- After attaching P-FRONT to P-FRAME, connect BN39-02835A of P-FRONT and BN39-02833A of P-FRAME
- The cable dummy exposed to the bottom of the set is pushed into the gap between P-FRONT and P-FRAME
LEFT
SMPS
B'd
OCM고정
사출물
BN41-03045A
BN39-02835A
CENTER RIGHT
SMPS
B'd
Inlet
B'd
OCM cable
BN39-02833A
57
SMPS
B'd
Fig.1 create FRONT space
MAIN
B'd
Fig.3 BN39-02835A –
BN39-02833A connect
(110 inch)
Fig.2 OCM cable connect
LED R&D Lab(VD)