Samsung IAB Series Install Manual page 64

4. FRAME installation and cable connection
⑭ Move the headless bolt through the hole of the DECO TOP
- The SET tilt can be removed using a headless bolt and the Y-axis can be adjusted to remain horizontal.
- After adjustment, separate the LEFT and TOP DECO from the SET.
Insert Wrench
A
A
Fig.1 point
BOLT-ETC
(TILT remove)
section A-A
COVER-DECO TOP
LED MODULE
63
Remove DECO after checking
horizontal and vertical
Fig.2 Deco removal after tilt check
LED R&D Lab(VD)