Samsung IAB Series Install Manual page 130

Product disassembly method – 4) LED module replacement
□ Module assembly
① Attach the adsorber to
the module to be
assembled.
Set x-y seam with
peripheral module.
Assemble 23
screws
② Assemble 23 screws.
Step adjustment
point
※ Step adjustment points are not required
sections, and work only on sections that require
height adjustment.
③ Align the z-axis with the
surrounding module using a
height adjustment screw. (Refer
to the next page)
129
Assemble 8 Bridge
Board Screws
Assem
PUSH PUSH
bling
PUSH PUSH
Assem
bling
PUSH PUSH
Module to
work with
④ Central Bridge Board
assembly.
Press the floating connector part
once.
LED R&D Lab(VD)