Samsung IAB Series Install Manual page 39

4. FRAME installation and cable connection
⑩ Connect the cable below whenever you hang one ASSY BRACKET P-FRONT to the P-FRAME.
- After creating a space by pulling the bottom of the P-FRONT, connect the OCM cable to the CN701 of the BN41-03045A board
- After attaching P-FRONT to P-FRAME, connect BN39-02835A of P-FRONT and BN39-02833A of P-FRAME
- The pile of cables exposed to the bottom of the set is pushed into the gap between P-FRONT and P-FRAME
SMPS
B'd
BN41-03045A
BN39-02833A
BN39-02835A
SMPS
SMPS
B'd
B'd
Inlet Inlet
B'd B'd
OCM cable
SMPS
B'd
Fig.1 Securing space at the
bottom of FRONT
MAIN
B'd
Fig.3 Connect BN39-
02835A – BN39-02833A
38
Fig.2 Connect OCM cable
LED R&D Lab(VD)