2. preparation of Cabinet installation
◆ Pre-prepare before installation
④ Open the bag shielding of the front module. Hold the internal COVER-CORNER, take
out the set, and open the AL-Bag and disconnect the AL screws (4 in total).
⑤ Disconnect the screw of the COVER-CORNER part. (4 locations)
※ When removing the cover-corner,
install the white PAD without disassembling it to prevent damage to the front module.
Al-Bag
Bag Zipper open
Fig.4 Before screen check,
remove PAD and attach SPACER-EVA
With the module vertical, two people
hold the red point and move it, and
then carefully lay it down on the PAD.
19
(Fig.4)
(Fig.5)
Fig.5 Cover Corner remove
SCREW POINT
PAD
LED R&D Lab(VD)