SVC – Firmware setting when replacing TCON board
□ When replacing the TCON board
① How to check the ID number of the replacement TCON
- Check the ID value of the TCON corresponding to the SHOW ID on -> as shown in the figure below.
② How to check replacement TCON group
number
- Based on the front of the screen below,
from the right, 1, 2, 3, 4
Group
Group
Number
Number
4
3
Group
Group
Number
Number
2
1
EX) How to copy data of Group 1, Tcon ID: 2 -> Group 2, Tcon ID: 2
147
Be sure to proceed with all data updates in
order.
LED R&D Lab(VD)