Gradation Calibration – Adjust SMC Reference selection
SMC 사용법
⑥
⑦
[Calibration procedure]
Enter the IP → Click 'Connected' button
→ Screen switching → Camera screen target positioning → Click 'Adjust' button
→ Measurement complete
Pattern Display for Auto Focus
→ Changed to Gray Pattern after Focus adjustment
⑧
⑨
⑩
→ Ref & Target setting → Click 'Next' button
6.
Adjust the screen to fit the screen.
7.
If the screen does not fit, slice the mobile phone screen to the right
and adjust the screen to fit the screen using the zoom button on
the pop-up window.
8.
Press the Adjust button to start calibration.
※ Other button description
⑨ MEASURE : Picture file save button
⑩ INT GAIN : Do not apply the proceeded SMC cal,
but apply the existing value
160
LED R&D Lab(VD)