Gradation Calibration - SMC
SMC 사용법
②
①
③
[Calibration procedure]
Enter the IP → Click 'Connected' button
→ Screen switching → Camera screen target positioning → Click 'Adjust' button
→ Measurement complete
Check if it is set to Select 'SubModuleCal'
⑤
④
→ Ref & Target setting → Click 'Next' button
4.
On the layout screen on the right, if you select a
cabinet to specify as Reference, the cabinet will be
displayed on the right.
Specifies ref or target in the cabinet
(If the target is not specified, calibration is performed
for all modules except the reference.)
click
5.
Click 'NEXT' button
159
click
LED R&D Lab(VD)