Warranty Terms - Elnec BeeHive8S User Manual

Check the ZIF sockets of the programmer and the socket converters for their condition
and wear. R emove debris, dust and grime from the ZIF sockets
compressed a
Weekly main
P erform the "Selftest plus" for every programmer or programming module.
Quarte rly maintenance
Gently clean the surface of the programmer with isopropyl alcohol or technical alcohol
on a soft cloth. The LCD clean with a soft cloth moisten in water only. Isopropyl alcohol
m ay damage surface of the LCD.
Perform the calibration test if the p
Biannual main
Check amount of dust or dirty in programmer. If you feel that a lot of dust or dirty is in
programmer, clear it by vacuum cleaner.
The warranty does not apply to any damage of programmer or its part caused by dust or
di rt.
If you want, you can send programmer to ELNEC for this maintenance.
Warning:
T he ZIF socket of the programmer and the socket converters are considered as
c onsumables. The life cycle of the ZIF socket of the programmer' is about
m echanical cycles. The life cycle of ZIF sockets of the socket converters is in generally
from 5.000 to 10.000 mechanical cycles, even if the life cycle of some special
ZIF sockets can be about 500.000 mechanical cycles. Programmed
environment and ZIF maintenance have direct influence to actual electrical lifetime of
ZIF socket (it means that ZIF socket does not cause programming failures yet). Keep
fingers away from contacts of ZIF socket, because contacts of the ZIF socket fouled by
s mear and grime from fingers may cause the programming fail
socket or the socket converter if you noticed increased number of programming failures.
The warranty does not apply to the ZIF sockets that are wear or grimy and which cause
larg e amount of failures during working with programmer.
Warr anty terms
T he manufacturer, ELNEC s.r.o. Presov, Slovakia, gives a guara
operatin g of the BeeHive8S Stand-Alone multiprogramming system, including protective
circuits, original brand components, and careful manufacturing and hours-long burn
in allow s us to provide a three-year warranty on parts and labor for the programm
(limited 25 000-cycle
Although we take as
build in computer, we can't provide higher warranty as we get from suppliers. So there
is a limited warranty of one year on all computer parts such as Motherboard, CPU, HD,
... .
If the product is diagnosed as defective, ELNEC s.r.o. or the
will repair or replace defective parts at no charge. Parts used for replacement and/or
whole programmer are warranted only for the reminder of the original warranty period.
F or repair within the warranty period, the customer must prove the date of
T hese warranty terms are valid for customers, who purchase a programmer directl
fr om Elnec. The warranty conditions of Elnec sellers may differ depending on the targe
country law system o
ir. Clean the ZIF sockets both in closed and opened p
tenance
tenance
warranty on ZIF sockets or 10,000-cycles on other ZIF sockets).
much care as possible to integrate high quality components in the
r Elnec seller's warranty policy.
rogrammer supports this feature.
45
ELNEC s.r.o.
with clean, dry and
osition.
25.000
ized BGA
devices,
ures. Change the ZIF
ntee on failure-free
authorized repair centre
purchase.
ing-
er
y
t