Elnec BeeHive8S User Manual page 25

Next serial value
When serialization is active, the panel displays current serialization mode and
serialization number or label that will be used for next device programmed. Recent
serial numbers used for each device are displayed in table Site and serialization status
in column Serialization.
Statistics
Panel contains information about the number of device operations processed and actual
count down status. For more details see Statistics dialog (menu Options / Statistics).
Recently selected Device name
Manufacturer and name of recently selected devices.
Recent Project name
Currently loaded project file name.
C hecksum of data stored in data buffer for currently selected device.
B u ton Run... ( ... can be operation t
C lick on button Run... will
s ites. Button can be used when no device operation is running on any pro
But ton Stop
C lick on button Stop w
connected programmer sites.
M enu File
F ile / Load project
This menu command opens dialog 'Load project', where user can choose, from w
location the project file has to be loaded and load selected project.
T o options are w available:
1. Load project fro
2. Load project fro
name, for example Program, Verify, Erase)
start selec ted device operation for all connected programmer
ill stop executing of currently running de
m [P rojects] folder...
m an other location...
25
ELNEC s.r.o.
grammer site.
vice operation on all
hich