Elnec BeeHive8S User Manual page 37

ELNEC s.r.o.
There is also available one special option - Keep "Load project" operation allowed.
T he option is set to disabled at default - it means the Load project operation button and
menu will be disabled when Protected mode is active.
If the option is enable d (checked), the Load project operation button and menu will be
al lowed in Protected mode.
To switch program from Protected mode back to Normal mode, use the menu
command Options / Normal mode. The "Password required" dialog appears. User has
to enter the same password as the password entered during switch to Protected mode.
When Protected mode is active, the label "Protected mode" is visible near the top of
Status table of main LCD screen.
Notes: Sometimes when Protected mode is switched from active state to inactive state
(Normal mode), some commands (for example command "Load project") may remain
disabled. This can be resolved by clicking on button Stop.
When user forgot the password to turn off Protected mode, then protected mode can be
turned off by administrator, by entering Administrator password. Administrator login is
n ot necessary.
M enu Help
Help / Index
Menu command displays short help on built-in touch screen. The short help contains
brief information about menu commands and basic operations with usage of touch
screen.
Help / Problem report...
Menu command "Create problem report" is used for writing more particular diagnostic
information to Log window and consequently copy Log window content to problem
report file. Problem report is useful when an error occurs in the control program or
programmer and that the user can not resolve and he must contact programmer
manufacturer. In this case when customer send message to manufacturer about his
problem it is good to send also problem report. Problem report can help manufa cturer to
localize the reason of error and resolve it sooner.
Help / Update software...
This important menu command allows users to make software updates. After selecting
th is item, program will display question "Are you sure?". If user confirms the question
with answer Yes, dialog "Select installation package" will be displayed.
37