Administration Of Build In Pc - Elnec BeeHive8S User Manual

• programmer type
• number of Sites available
• operating system
• information about processor and size of installed RAM memory
• computer name and IP address
• system date and time
Welcome screen can be closed by clicking on button OK.

Administration of build in PC

In troduction
• BeeHive8S Stand-Alone multiprogramming system is powerful programmer
equipped with Windows XP Embedded operating system ("OS"). There are two
major kinds of administration of the OS – network and local. OS is configured with
two users a
• admin
• operator.
Credentials for BeeHive8S Stand-Alone multiprogramming system users are:
Administrator
Operator
Network administration
C onnecting to network
OS in programmer is configured for operating with TCP/IP network. To obtain correct IP
address, the configured DHCP server must run in your local network, when programmer
is starting. After progr
bottom part of sc
When IP address is equal to
server is not running when device start or other kinds of error occur – refer to
troubleshooting chapter.
ccounts
Login Password
admin saadmin
operator saoperator
ammer is started it will show "Welcome"/"About" screen. On
reen in line "IP address:" is the address obtained from DHCP server.
127.0.0.1, then no network cable is connected, DHCP
39
ELNEC s.r.o.