If You Have An Unsupported Target Device; Maintenance - Elnec BeeHive8S User Manual

Note:
You may find the "DEVICE PROBLEM REPORT" form at our Internet site
(www.elnec.com), section 'Su
Warning:
Devices described at this manual are class A products. In domestic environment this
p roducts may cause radio interference in wh
adequate measures.
Because BeeHive8S have interna
•
Circuit breakers (overcurrent protection) must be a part of building electrical
installation.
•
Pull out power cord plug from outlet to disconnect program
If y u o have an unsupported target device
If y ou need to operate on a target device not supported by the control program for
pro grammer, please do not despair and follow these next steps:
• Lo ok in the device list of the latest version of the control program on our Internet site
(s ection Download, file corresponded to your programmer). Your new target device
m ight already be included in this version! If yes, download the file PG4UWARC.exe
an d install the new version of the control program.
• Contact ELNEC direct, filling up a "Device Problem Report" form following the
in structions at the end of this form. We may need detailed data sheets of your target
de vice and, if possible, samples. The samples will be returned to you after we
in clude your target device in a new version of control software.
No te:
Se e also AlgOR service at our Internet site (www.elnec.com), section 'Support'
Mainte nance
We r ecommend following the instructions and precautions herein to achieve high
reliabi lity of the programmer for a long period of time.
The programmer maintenance depends on
Regardless, the following recommendations are generally accepted:
•
Do not use and store the programmer in dusty places.
•
Humidity accelerates sedimenta
•
After end the job cover the ZIF socket of the program
•
Do not expose the programmer to direct sunlight or p
Dail maintenance y
Without all these items we cannot admit your
programmer for repair.
pport'.
Class A ITE notice
ich case the user may be required to take
l power supply, follow these special precautions:
character and amount of its use.
tion of debris and dust in ZIF socket.
44
ELNEC s.r.o.
mer from mains.
mer with enclosed dust cover.
osition near a source of heat.