Technical Specification - Elnec BeeHive8S User Manual

Technical specification

Specification (BeeHive8S multiprogramming system)
• 8x universal programming module (8x 48-pin DIL ZIF sockets and 8x ISP connector)
• operation result LEDs, LED power
• line power input 100-240VAC/60W max.
• banana jack for ESD wrist straps connection
• banana jack for connection to ground
Specification (PC system insid
• Microsoft Windows XP Embedded operation s
• PC Intel Core 2 Duo 2.4 GHz
• 1024 MB RAM
• 160 GB HDD
S PECIFICATION (valid for each
H ARDWARE
Base unit, DACs
• USB 2.0 high-speed compatible port, up to 480 Mbit/s
• on-board intelligence: powerfu
• three D/A conve
•
VCCP range 0
• VPP1, VPP2 ra
• autocalibration/selftest
• selftest capability
Socket, pindriv
• 48-pin DIL ZIF (Zero
48-pin
• pindrivers: 48 universal
• VCCP / VPP1 / VPP2 can be connected to each pin
• perfect ground for each
• FPGA based TTL driver provide
• analog pindriver output
• current limitation,
• ESD protection on
• continuity test: each pi
IS P connector
• 20-pin male type with mis
• 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-do
up to 5V to handle all (low-vo
• 1x VCCP voltage (range 2V..7V/100mA) , can be applied to two pins
l microprocessor and F
rters for VCCP , VPP1, and VPP2, controllable rise and fall time
..8 V/1A
nge 0..26V/1A
er
Insertion Force) socket accepts both 300/600 mil devices up to
pin
s H, L, CLK, pull-up, pull-down on all pindriver pins
level se lectable from 1.8 V up to 26V
overcu rrent shutdown, power failure shutdown
each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
n is tested before every programming operation
s insertion lock
ltage including) devices.
e of programmer)
ystem
programming module)
transfer rate
PGA based state machine
wn; level H selectable from 1.8V
11
ELNEC s.r.o.