Network Settings - Nice GEFEN GF-AVIP-MC User Manual

This tab provides access to system configuration options including IP configuration for
both LAN ports, Discovery Protocol settings, TCP and UDP configurations.
• LAN1 & LAN2 Pane: The IP mode for each LAN port (DHCP, Static IP, or Auto
IP), IP address, netmask and gateway can be set here. When a LAN port is
set to Auto IP mode it will automatically assign itself an APIPA address from
the 169.254.XXX.XXX range. When a LAN port is set to DHCP mode, it will
automatically attempt to obtain proper configuration information from the local
DHCP server. If no DHCP server is available, or the user wishes to configure
the network settings manually, please set the LAN port to Static IP mode and
enter the information as appropriate for the connected network. Press Save and
perform a reboot to apply changes.
• LAN Mode: Click the dropdown menu to select Separate Mode or Combined
mode. Press Save and Reboot to apply changes.
• Mac Address: Displays MAC address of the AVoIP Matrix Controller for LAN1
and LAN2.
• IP Mode: Selects the network Mode: Static or DHCP. Press Save and Reboot to
apply changes. The Default for LAN1 is Static. LAN2 default is AutoIP.
• IP Address: Enter the IP address of the AVoIP Matrix Controller. Press save and
reboot to apply changes. This field is only available if the Mode is set to Static.
The Default for LAN1 is 192.168.1.72.
• Subnet Mask: Enter subnet mask of the managed switch. Press Save and
Reboot to apply changes. This field is only available if the Mode is set to Static.
The default Subnet Mask for LAN1 is 255.255.255.0.
WebGUI Control Page

Network Settings

38