Table of Contents
Advertisement
General UDP Commands
Network Settings (cont.)
#SET_LAN_MODE
Set LAN mode to combined or separate.
Syntax
Parameters
Example
Example Feedback
#GET_LAN_MODE
Get LAN mode status.
Syntax
Parameters
Example
Example Feedback
#SET_IP_MODE
Set the IP mode to DHCP or static.
Syntax
Parameters
Example
Example Feedback
#GET_IP_MODE
Get the current IP mode.
Syntax
Parameters
Example
Example Feedback
#SET_LAN_MODE PARAM1
PARAM1 = 1 ~ 2
1 - COMBINED
2 - SEPARATE
#SET_LAN_MODE 2
LAN_MODE 2
REBOOT UNIT TO APPLY CHANGES
#GET_LAN_MODE
LAN_MODE 2
#SET_IP_MODE PARAM1 PARAM2
PARAM1 = 1 ~ 2
1 - LAN1 (CONTROL PORT)
2 - LAN2 (VIDEO PORT)
PARAM2 = 0 ~ 1
0 - STATIC
1 - DHCP
#SET_IP_MODE 1 0
#SET_IP_MODE 2 1
IP_MODE 1 0
IP_MODE 2 1
#GET_IP_MODE PARAM1
PARAM1 = 1 ~ 2
1 - LAN1 (CONTROL PORT)
2 - LAN2 (VIDEO PORT)
#GET_IP_MODE 1
#GET_IP_MODE 2
IP_MODE 1 0
IP_MODE 2 1
43
Advertisement
Table of Contents
