This page provides a way to define a group of displays that will all receive the same
routed source when used in Presets or from the Monitor & Control tab. Receivers can
be assigned to a Group by simply performing drag & drop of any or all Receivers. Saved
Groups will appear in the Routing pages as a routable item in the Receiver pane. Up to
256 Groups can be configured for each User.
• Add Group: Creates a new Group. Click on this button to add a new
Group.
• Edit Group: Edits an existing Group. Click on this button to Edit a
Group.
• Delete Group: Deletes an existing Group. Click on this button to Delete
a Group.
• Group ID: Assigns a Group ID.
• Group Name: Assigns a Group Name.
• Save Group: Saves current settings to a Group.
• Group Pane: Displays the Receivers assigned to the group.
• Device Pane: Displays an available Receivers to assign to a group. Drag and
drop any Receiver to the Group Pane.
• Remove All: Removes all Receivers in the Group.
• All: Assigns all Receiver to the Group.
WebGUI Control Page
Group Settings
28