WebGUI Control Page
Independent Routing Tab
This page allows for independently routing I/O signals for Video, Audio, IR, RS-232, or
USB from any Transmitter to any Receiver. By default, the routing these I/O signals will
follow video of the routed Transmitter to the Receiver unit. To select a fixed route for a
Receiver, use the drop down box of the desired I/O signal and select a Transmitter. Any
changes will be applied live.
Preset Recall Tab
This tab lists all currently defined Presets and provides a simple way to activate them.
Each Preset button will show the Preset ID followed by the Preset Name.
To activate a saved Preset, click on the appropriately named button. Presets are defined
within the Settings / Presets tab. Only the Presets that have been defined for Guest will
be visible when logged off. Logged in Users will see their own defined Presets.
20