Table of Contents
Advertisement
General UDP Commands
Network Settings (cont.)
#SET_GATEWAY
Set the Gateway address.
Syntax
Parameters
Example
Example Feedback
#GET_GATEWAY
Get the current Gateway address.
Syntax
Parameters
Example
Example Feedback
#SET_TELNET_ACCESS
Enable/disable Telnet Access.
Syntax
Parameters
Example
Example Feedback
#GET_TELNET_ACCESS
Get the current status of Telnet Access.
Syntax
Parameters
Example
Example Feedback
#SET_GATEWAY PARAM1
PARAM1 = 1 ~ 2
1 - LAN1 (CONTROL PORT)
2 - LAN2 (VIDEO PORT)
PARAM2 = XXX.XXX.XXX.XXX
XXX - 0 ~ 255
#SET_GATEWAY 1 192.168.1.1
GATEWAY 1 192.168.1.1
#GET_GATEWAY
PARAM1 = 1 ~ 2
1 - LAN1 (CONTROL PORT)
2 - LAN2 (VIDEO PORT)
#GET_GATEWAY 1
GATEWAY 1 192.168.1.1
#SET_TELNET_ACCESS
PARAM1 = 0 ~ 1
0 - DISABLED
1 - ENABLED
#SET_TELNET_ACCESS 1
TELNET_ACCESS 1
#GET_TELNET_ACCESS
TELNET_ACCESS 1
PARAM1
45
Advertisement
Table of Contents
