WebGUI Control Page
• Device Settings: Click on the Device Settings button to configure the Transmitter
or Receiver Settings. Press the Save button and perform a device reboot to apply
settings. See System Command options to perform a device reboot.
NOTE: Functions will vary depending on the Gefen Video and KVM over IP models
used. Refer to the manuals for those devices for details of each setting.
» System Command functions: Click on the drop down menu which
shows the following options. Press Save to apply settings.
» Factory Reset: Performs a Factory Reset to the device.
» Reboot: Performs a Reboot to the device.
» Firmware Update: Performs a Firmware Update to the device.
NOTE: Firmware package for Video and KVM over IP devices must be uploaded to
the AVoIP Matrix controller before executing the Firmware Update function.
26