Table of Contents
Advertisement
General UDP Commands
Help
#HELP
Prints all available TCP/UDP commands to the screen.
Syntax
Parameters
Example
Example Feedback
Network Settings
#GET_MAC_ADDR
Print the MAC address to the screen.
Syntax
Parameters
Example
Example Feedback
#GET_IPCONFIG
Get the current IP configuration.
Syntax
Parameters
Example
Example Feedback
#HELP PARAM1(OPTIONAL)
PARAM1 - ANY TCP/UDP COMMAND (NO '#')
#HELP SET_IP_MODE
SET THE IP MODE TO DHCP, STATIC, OR AUTO IP
#SET_IP_MODE PARAM1
PARAM1 = 0 - 2 (0 = STATIC; 1 = DHCP; 2 = AUTO IP)
#GET_MAC_ADDR PARAM1
PARAM1 = 1 ~ 2
1 - LAN1 (CONTROL PORT)
2 - LAN2 (VIDEO PORT)
#GET_MAC_ADDR 1
#GET_MAC_ADDR 2
LAN1 MAC ADDRESS IS: 00-1c-91-03-80-01
LAN1 MAC ADDRESS IS: 00-1c-91-03-80-02
#GET_IPCONFIG
CONTROL PORT SETTINGS:
IP MODE: DHCP
IP: 192.168.0.70
NETMASK: 255.255.255.0
GATEWAY: 192.168.0.1
MAC ADDRESS: a6:4e:f7:2a:59:4b
VIDEO PORT SETTINGS:
IP MODE: STATIC
IP: 192.168.2.75
NETMASK: 255.255.255.0
GATEWAY: 192.168.2.1
MAC ADDRESS: ea:66:4e:bf:de:5f
42
Advertisement
Table of Contents
