Table of Contents
Advertisement
WebGUI Access Methods
Gefen Syner-G Device Discovery
Download the Gefen Syner-G software at
www.gefen.com/gefen-syner-g-software/
Connect the unit and your PC/Laptop to the same
active network and run the Gefen Syner-G software. A
list of devices connected to the local network will be
displayed indicating their current IP address.
Locate the Product Name: GF-AVIP-MC
By clicking on one of the listed devices you will be
presented with the network details of that particular
device.
You can alter the static IP network settings for
the device, or switch the unit into DHCP mode to
automatically obtain proper network settings from a
local DHCP server.
To switch to DHCP mode, select DHCP from the IP
mode drop-down, then click Save. Then click Reboot.
Local Access
Connect an HDMI cable from controller to a Display. Connect USB Mouse and Keyboard.
Multicast DNS (mDNS) Discovery
The controller must in the same IP range of the network.
On the browser, type: AVIP-MC.local/
This will perform a device look up based on the domain name and retrieve its IP address.
To modify the mDNS name, see Network / Discovery Protocol Settings section.
11
Advertisement
Table of Contents
