Nice GEFEN GF-AVIP-MC User Manual page 46

General UDP Commands
Network Settings (cont.)
#SET_TELNET_PORT
Set the Telnet Communication port.
Syntax
Parameters
Example
Example Feedback
#GET_TELNET_PORT
Get the current Telnet Communication port.
Syntax
Parameters
Example
Example Feedback
#SET_UDP_ACCESS
Enable/disable UDP access.
Syntax
Parameters
Example
Example Feedback
#GET_UDP_ACCESS
Get the current status of UDP Access.
Syntax
Parameters
Example
Example Feedback
#SET_UDP_PORT
Set the UDP communication port.
Syntax
Parameters
Example
Example Feedback
#SET_TELNET_PORT PARAM1
PARAM1 = 0 ~ 65535
#SET_TELNET_PORT 23
TELNET_PORT 23
#GET_TELNET_PORT
TELNET_PORT 23
#SET_UDP_ACCESS
PARAM1 = 0 ~ 1
0 - DISABLED
1 - ENABLED
#SET_UDP_ACCESS 1
UDP_ACCESS 1
#GET_UDP_ACCESS
UDP_ACCESS 1
#SET_UDP_PORT PARAM1
PARAM1 = 0 ~ 65535
#SET_UDP_PORT 50007
UDP_PORT 50007
PARAM1
46