Table of Contents
Advertisement
• Transmitter: Click on the drop down menu select the Transmitter to route from.
• Receiver/Group: Click on the drop down menu select the Receiver, Group, or
Video Wall Group to route to.
• Order: Assigns the order of each Command to be executed when multiple
commands are created within a preset.
• New: Adds a new Command to a Preset.
• Confirm: Saves configuration to a Preset.
This page allows to configure EDID that will be used by the source that is connected
to each input. Internal, External or a custom EDID can be selected. Clicking on any
Transmitter will allow you to display limited EDID information.
• Information Pane: Displays limited EDID information of any selected Transmitter.
• Lock Enable: Prevents EDID to be overridden.
• Internal: Configures the Video and KVM over IP devices to utilize Internal mode.
• External: Configures the Video and KVM over IP devices to utilize External
mode.
• Custom: Configures the Video and KVM over IP devices to utilize a Custom
EDID.
• Choose File: Available when Custom mode is set. Allows to browse for an EDID
*.bin file to Upload.
• Upload: Uploads a Custom EDID when in Custom mode.
• Execute: Saves an EDID mode to a selected Transmitter. Select a Transmitter
and EDID Option, then press Execute to save the setting.
WebGUI Control Page
EDID Management
30
Advertisement
Table of Contents
