Xilinx Zynq UltraScale+ RFSoC ZCU208 User Manual page 22

petalinux-package --force --boot --fsbl ./pre-built/linux/images/
zynqmp_fsbl.elf --fpga ./images/linux/system.bit --pmufw ./pre-
built/linux/images/pmufw.elf --u-boot ./images/linux/u-boot.elf
5. Copy these files to the SD card:
<project_name>/images/linux/BOOT.BIN
<project_name>/images/linux/image.ub
<project_name>/images/linux/boot.scr
autostart.sh (copy from the Externals\image\216 folder)
UG1433 (v1.2) October 27, 2021
RF Data Converter Evaluation Tool User Guide
Chapter 4: Software Design and Build
www.xilinx.com
Send Feedback
22