Wide A4 Pitch - Kyocera FS-2000D Advanced Operation Manual

Using the Operation Panel
Carriage-Return (CR) Action

Wide A4 Pitch

2-48
This procedure instructs the printer what to do when it receives a carriage-
return code (0DH).
• CR only: A carriage-return is performed (Default).
• CR and LF: A linefeed and carriage return are performed.
• Ignore CR: The carriage-return is ignored.
1
Press [Menu].
Press ? or @ repeatedly until Page Set >
2
appears.
Press B.
3
Press ? or @ repeatedly until >CR Action
4
appears.
5 Press [OK]. A blinking question mark (?)
appears.
Press ? or @ repeatedly until the desired carriage-return action appears.
6
7 When the desired action is displayed, press [OK].
8 Press [Menu]. The display returns to Ready.
Turn this to On to increase the maximum number of characters that can be
printed in a line for an A4 page (78 characters at 10 pitch) and Letter size
page (80 characters at 10 pitch). This setting is only effective in PCL 6
emulation.
1
Press [Menu].
Press ? or @ repeatedly until Page set >
2
appears.
Press B.
3
Page Set
>CR Action
CR only
>CR Action
? CR only
Page Set
ADVANCED OPERATION GUIDE
>
>