Kyocera FS-2000D Advanced Operation Manual page 106

Using the Operation Panel
2-80
Press ? or @ repeatedly until >Sleep
4
Timer > appears.
Press B and display >>Auto Sleep.
5
6 To set the sleep timer, press [OK]. A
blinking question mark (?) appears.
Press ? or @ to change On to Off.
7
8
Press [OK]. The sleep timer is turned off.
9 To exit the menu selection, press [Menu].
Sleep Timer Timeout Time
You can adjust the length of time the printer waits before entering Auto
Sleep in the absence of data. The default time is 15 minutes.
The printer reverts to normal operation mode when the printer receives a
print job, the operation panel is operated, or one of the exterior covers is
opened.
1
Press [Menu].
Press ? or @ repeatedly until Others >
2
appears.
Press B.
3
Press ? or @ repeatedly until >Sleep
4
Timer > appears.
5
To change the timeout time, press [OK]. A
blinking cursor (_) appears.
>Sleep Timer
015 min.
>>Auto Sleep
On
>>Auto Sleep
? On
>>Auto Sleep
? Off
Others
>Sleep Timer
015min.
>Sleep Timer
015min.
ADVANCED OPERATION GUIDE
>
>
>