ADVANCED OPERATION GUIDE
Cursor Keys
The four cursor keys are used in the menu system to access an item or
enter numeric values.
The arrow key with the question mark (
jam message has appeared on the message display. A help message will
then appear to facilitate jam clearing in the location.
OK Key
This key is used to:
•
Finalize settings of numeric values and other selections.
•
Set the paper source when Use alternative? is shown in the
message display.
NOTE:
If you hold down [OK] and press [Menu] when Ready is shown
on this printer, the AdministrationID menu will be displayed. This menu is
the setting menu for administration under the Account Management
System and is normally not used. Press [Menu] to return to Ready.
Using the Operation Panel
) may be pressed when the paper
2-9