Wide A4 Pitch - Kyocera FS-C5015N Advanced Operation Manual

Carriage-Return (CR) Action

Wide A4 Pitch

ADVANCED OPERATION GUIDE
This procedure instructs the printer what to do when it receives a carriage-
return code (0DH).
• CR only: A carriage-return is performed (Default).
• CR and LF: A linefeed and carriage return are performed.
• Ignore CR: The carriage-return is ignored.
1
Press [MENU].
2 Press or repeatedly until Page Set >
appears.
3
Press .
4 Press or repeatedly until >CR Action
appears.
5 Press [OK] ([ENTER]). A blinking question
mark (?) appears.
6 Press or repeatedly until the desired carriage-return action appears.
7 When the desired action is displayed, press [OK] ([ENTER]).
8 Press [MENU]. The display returns to Ready.
Turn this to On to increase the maximum number of characters that can be
printed in a line for an A4 page (78 characters at 10 pitch) and Letter size
page (80 characters at 10 pitch). This setting is only effective in PCL 6
emulation.
1
Press [MENU].
2
Press or repeatedly until Page set >
appears.
3
Press .
Using the Operator Panel
Page Set
>CR Action
CR only
>CR Action
? CR only
Page Set
2-47
>
>