Overriding Difference Between A4 And Letter - Kyocera FS-2000D Advanced Operation Manual

Selecting the Output Stack (FS-3900DN/FS-4000DN)

Overriding Difference between A4 and Letter

ADVANCED OPERATION GUIDE
The Stack Select menu on the operation panel allows you to select either
the face-down tray or the faceup tray option for the output stack.
1
Press [Menu].
Press ? or @ repeatedly until Paper
2
Handling > appears.
Press B.
3
Press ? or @ repeatedly until >Stack
4
Select appears.
5 To change the output stack, press [OK]. A
blinking question mark (?) appears.
Press ? or @ select output stack - Top tray FaceDn or RearTray
6
FaceUp.
7
When the desired output stack is displayed, press [OK].
When the Override A4/LT is turned On using the operation panel, the
printer ignores the difference between A4 and Letter paper sizes. Printing
is performed without an error message even if the actual paper size in the
current cassette differs from the paper size formatting the job.
By default, this feature is off.
1
Press [Menu].
Press ? or @ repeatedly until Paper
2
Handling > appears.
Press B.
3
Press ? or @ repeatedly until >Override
4
A4/LT appears.
Using the Operation Panel
Paper Handling >
>Stack Select
Top tray FaceDn
>Stack Select
?Top tray FaceDn
Paper Handling >
>Override A4/LT
Off
2-73