Using USB Flash Memory
ADVANCED OPERATION GUIDE
The USB flash memory is available for only PDF file. PDF files should be
stored on the root directory of USB flash memory. The PDF file name can
be up to 99 single-byte characters in length.
NOTE:
The file name which is displayed on the message display can be
up to 16 characters.
Installing the USB flash memory into the printer allows you to perform the
following operations.
•
Reading PDF file
•
Removing the USB flash memory
•
Printing a list of data names (partitions)
The operations of the USB flash memory are the same as those of the
CompactFlash card. Refer to the relevant sections in Using the
CompactFlash Card on page 2-54.
Removing the USB Flash Memory
1
Press [Menu].
Press ? or @ repeatedly until USB
2
memory > appears.
Press B.
3
Press ? or @ repeatedly until >Remove
4
Device appears.
5
Press [OK]. A question mark (?) appears.
6
Press [OK]. The display returns to Ready, and you can remove the USB
flash memory.
Using the Operation Panel
USB Memory
>Remove Device
>Remove Device ?
2-63
>