Character Pitch - Kyocera FS-4100DN Operation Manual

Size:
(4.00 - 999.75)
/*12.00-point

Character Pitch

You can set the character pitch for fixed fonts.
Font:
1
********************- Font Type
2
Font ID
3
Courier
Pitch:
(0.44 - 99.99)
/10.00-cpi
Code Set (Setting the code set)
You can change the character code set. Available character code sets vary depending on the current font. (The default is
IBM PC-8.)
Code Set:
********************- *IBM PC-8
IBM PC-8(D/N)
IBM PC-850
4
a b
5
6
1
2
a b
[ Exit ]
3
4
a b
5
6
1
2
a b
Press [OK]. The Size entry screen appears.
Press or to enter the font size.
Note The font size can be set between 4.00 and 999.75
points, in 0.25-point increments.
Press [OK]. The font size is set and the Font menu reappears.
In the Print Settings menu, press
Press [OK]. The Font menu screen appears.
Press or to select Pitch.
Press [OK]. The Pitch entry screen appears.
Use the numeric keys or press
Note The character pitch can be set between 0.44 and
99.99 characters per inch, in 0.01 character-per-inch
increments.
Press [OK]. The character pitch is set and the Font menu reappears.
In the Print Settings menu, press
Press [OK]. The Code Set screen appears listing the available
character code sets.
4-47
Operation Panel
or to select Font.
to enter the character pitch.
or
or to select Code Set.