Setting Wide A4; Verifying The Total Printed Pages - Kyocera FS-6020 Operation Manual

Chapter 1 Using the Operator Panel
Press the or
2
appears.
Page Set
Press the key.
3
Press the or
4
appears.
>CR Action
CR only
Press the ENTER key. A blinking question mark (?)
5
appears.
>CR Action
? CR only
Press the or
6
riage-return action appears.
A carriage-return is performed.
CR only
(default)
A carriage-return and linefeed are
CR and LF
performed.
The carriage-return code is ignored.
Ignore CR
When the desired action is displayed, press the
7
ENTER key.
Press the MENU key. The message display returns to
8
Ready.

Setting Wide A4

Turning this On increases the maximum number of charac-
ters that can be printed in a line for an A4 page (78 characters
at 10 pitch) and a Letter size page (80 characters at 10 pitch).
This setting is effective only in the PCL 6 emulation.
Press the MENU key.
1
Press the or
2
appears.
Page Set
Press the key.
3
Press the or
4
pears.
1-52
key repeatedly until Page Set >
>
key repeatedly until >CR Action
key repeatedly until desired car-
key repeatedly until Page Set >
>
key repeatedly until >Wide A4 ap-
>Wide A4
Off
Press the ENTER key. A blinking question mark (?)
5
appears.
>Wide A4
? Off
Select On or Off using the
6
Press the ENTER key.
7
Press the MENU key. The message display returns to
8
Ready.

Verifying the Total Printed Pages

You can display the total number of pages printed by your
printer for confirmation whenever necessary. The total num-
ber of printed pages can also be checked on the status page.
Moreover, for proper maintenance scheduling, it will be nec-
essary to reset the toner counter using this menu each time a
new toner container is installed.
This procedure only displays the total number of printed
pages. The number cannot be changed.
Press the MENU key.
1
Press the or
2
Counters > appears.
Life Counters
Press the key.
3
Press the or
4
followed by the current total printed pages
(0123456 in this example).
>Total Print
0123456
Press the MENU key. The message display returns to
5
Ready.
or key.
key repeatedly until Life
>
key until >Total Print appears,